Single cylinder hydraulic lifting platform
Description
Single cylinder hydraulic lifting platform is mainly used for cargo transport between floors, using a side cylinder, the working principle is the same as the double cylinder, suitable for load less than 1 ton, table size requirements of smaller environment, smooth operation, low noise, easy maintenance, long service life.
Product Details
Product introduction
Mechanical mechanism: The mechanical mechanism is divided into four parts, the base frame, the car platform, the protective net and the hydraulic actuator (cylinder).
Hydraulic system: The hydraulic system is driven by the motor gear pump to absorb oil, after the auxiliary hydraulic components to push the hydraulic actuator (cylinder) up and down action and then to the car platform, down.
Electrical system: The electrical system is used to start the motor and drive the lowering solenoid valve, so as to achieve the purpose of the car platform up and down.
Product parameter
| Model number | Rated load(KG) | Lifting stroke(mm) | Lower and higher(mm) | Table size(mm) | Lifting time | Motor powerkw |
| SJG0.5-4 | 500 | 4000 | 85 | 1000 x1000 | 5.5m/min | 2.2 |
| SJG0.5-8 | 500 | 8000 | 85 | 1000 x1000 | 5.5m/min | 2.2 |
| SJG1-4 | 1000 | 4000 | 85 | 1000 x1000 | 5.5m/min | 3.7 |
| SJG1-8 | 1000 | 8000 | 85 | 1000 x1000 | 5. 5m/min | 3.7 |
Product display
External door diversification for customers to choose
1. With gated interlock double door, low price, high configuration, high security performance.
2.Automatic sliding door, safe, convenient and time-saving, lift up to the second floor when the first floor door automatically drops to block the purchase port, the second floor door automatically opens, lift down to the first floor when the second floor door automatically closes, the first floor door automatically rises and opens.
3. Counterweight door, easy to lift up, does
not occupy the use area of the factory.
4.Automatic elevator door, high-end atmosphere
Product advantage
The structure of the car frame body is adopted, with 24
The pulley jammed the track, leaving its cargo in place
Which corner will not exist partial load.
The track is made of I-beams and fixed
with three wheels
Clamp the rails tightly at each corner
of the car Tao, don't leave a gap.
Do two level guidance on both sides of the top of the cylinder, pull the cylinder to rise smoothly, there will be no shaking of the cylinder phenomenon, enhance the service life of the oil seal in the cylinder.
Lorem ipsum dolor sit amet, consectetur
adipiscing elit. Ut elit tellus, luctus nec
ullamcorper mattis, pulvinar dapibus leo.
Intelligent electronic control, plc program system, optional explosion-proof type
Factory direct sales, quality assurance
Elevator engineering case
01. Indoor installation examples
02. Outdoor installation examples
Reviews (0)
Shipping & Delivery
Express can be sent to the United States, Vietnam, Saudi Arabia. If you are from another country, please contact: hongqiuhuang679@gmail.com
Products and services
Extensive product inventory
We have an extensive stock of used injection molding machines, covering a wide range of brands, models and specifications. Whether you need a small experimental injection molding machine or a large industrial production injection molding machine, we can provide you with the right choice.
Our products include but are not limited to monochrome injection molding machine, two-color injection molding machine, silicone injection molding machine, etc., to meet the diverse needs of different customers.
We have an extensive stock of used injection molding machines, covering a wide range of brands, models and specifications. Whether you need a small experimental injection molding machine or a large industrial production injection molding machine, we can provide you with the right choice.
Our products include but are not limited to monochrome injection molding machine, two-color injection molding machine, silicone injection molding machine, etc., to meet the diverse needs of different customers.
Professional testing and evaluation
Every used injection molding machine that enters our inventory is rigorously tested and evaluated. Our technical team uses professional testing equipment and tools to conduct a comprehensive inspection of the mechanical structure, electrical system, hydraulic system, etc., to ensure the performance and safety of the equipment.
We also provide a detailed evaluation report for each piece of equipment based on its age, maintenance and performance, so that customers can clearly understand the actual condition of the equipment.
Every used injection molding machine that enters our inventory is rigorously tested and evaluated. Our technical team uses professional testing equipment and tools to conduct a comprehensive inspection of the mechanical structure, electrical system, hydraulic system, etc., to ensure the performance and safety of the equipment.
We also provide a detailed evaluation report for each piece of equipment based on its age, maintenance and performance, so that customers can clearly understand the actual condition of the equipment.
Excellent after-sales service
We not only provide high-quality used injection molding machines, but also provide customers with a full range of after-sales service. Including equipment installation and commissioning, training guidance, maintenance and so on.
We have a professional after-sales service team, ready to provide customers with technical support and solutions. We promise to respond within [X] hours after receiving a customer's service request to ensure that the customer's production is not affected.
We not only provide high-quality used injection molding machines, but also provide customers with a full range of after-sales service. Including equipment installation and commissioning, training guidance, maintenance and so on.
We have a professional after-sales service team, ready to provide customers with technical support and solutions. We promise to respond within [X] hours after receiving a customer's service request to ensure that the customer's production is not affected.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Related products
Hydraulic lifting platform
The hydraulic lifting platform is mainly composed of three parts, respectively:
1. Mechanical mechanism
2. Hydraulic system
3. Electrical system
Request A Quote
Shear and fork fixed unloading platform
Shear fork type fixed lifting platform is mostly used for cargo transport between the height difference of the production line, material up and down the line, adjustment of the working height during the work assembly, feeding the installed machine at the height, lifting of parts during the assembly of large equipment, storage loading and unloading sites and forklifts and other handling vehicles supporting the rapid loading and unloading of goods.
Request A Quote
Straight top hydraulic lifting platform
Straight top elevator good reputation in home appliance manufacturing, food and drugs, modern furniture, machinery and electronics, automobile repair, precision equipment, clothing, instrumentation, building materials and other industries have been widely used.
Request A Quote
Injection molding machine
Injection molding machine
Reviews
There are no reviews yet.