Automatic 6000bph 500ml Mineral Drinking Water Bottle Blowing Molding Machine for Water Filling Production Line
| Customization: | Available |
|---|---|
| Type: | Extrusion Blow Molding Machine |
| Warranty: | Two Years |
Description
Basic Info.
Packaging & Delivery
Product Description
Automatic 6000bph 500ml Mineral Drinking Water Bottle Blowing
Molding Machine for Water Filling Production Line
Product Description
Description:
PM series pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has various cavities and the maximum capacity of the products is 20L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers etc. Which is made of plastic of crystalline type, such as PET and PP etc.
Flow chart:
PET preform→Autoloader→preheater →molding→ bottles
Product Parameters
Technical Parameter:
Automatic High Speed Energy Saving Type Machine
| Model | PM-K4 | PM-K6 | PM-K8 | PM-K12 | |
| Bottle type specification | Cavity | 4 | 6 | 8 | 12 |
| Max.volume | 2L | 2L | 2L | 0.75L | |
| Bottle mouth maximum overall diameter | 28-38mm | 28-38mm | 28-38mm | 28-38mm | |
| Bottle biggest diameter | 100mm | 100mm | 100mm | 100mm | |
| Bottle maximum height | 330mm | 330mm | 330mm | 330mm | |
| Capacity | Theory output | 6000-8500BPH | 9000-12000BPH | 14000BPH | 24000BPH |
| Power specification | Light tube quantity | 16pcs | 32pcs | 32pcs | 32pcs |
| Light tube power | 1.25KW | 1.25KW | 1.5KW | 1.75kw | |
| Maximum heating power | 20KW | 40kw | 48KW | 56kw | |
| All electric machine installation | 29KW | 49kw | 65KW | 71kw | |
| Actual consumption | 30%--60% | 30%--60% | 30%--60% | 30%--60% | |
| Air pressure specification | Work pressure | 5-6kg/cm2 | 5-6kg/cm2 | 5-6kg/cm2 | 5-6kg/cm2 |
| Blow bottle pressure | 25-45kg/cm2 | 25-45kg/cm2 | 25-45kg/cm2 | 25-45kg/cm2 | |
| Higher -pressure gas consumption | 6000Ltr/min | 8000Ltr/min | 12000Ltr/min | 24000Ltr/min | |
| Frozen water specification | Work pressure | 5-6 kg/cm2 | 5-6 kg/cm2 | 5-6 kg/cm2 | 5-6 kg/cm2 |
| Temperature range | 10ºC | 10ºC | 10ºC | 10ºC | |
| Consumption | 8000kcal/hr | 8000kcal/hr | 12000kcal/hr | 12000kcal/hr | |
| Forzen water flow | 88L/min | 120L/min | 150L/min | 220L/min | |
| Machine specification | Machine size | 3.6x1.6x1.9 | 4.8x1.8x1.9 | 5.8x1.6x1.9 | 7.6x1.6x1.9 |
| Machine weight | 4.3tons | 6.1tons | 7.5tons | 11.5tons | |
Automatic Type Machine
| Model | Item | PM-A2 | PM-A4 | PM-A6 | PM-9000 | PM-12000 |
| Productivity | Depend on bottle design | 1800-2200PCS/H | 3500-4200PCS/H | 5500-6300PCS/H | 8000-9200PCS/H | 11000-12200PCS/H |
| Product type | Volume | 0.1-2.0L | 0.1-2.0L | 0.1-2.0L | 0.1-0.75L | 0.1-0.75L |
| Body diameter | ≤100mm | ≤100mm | ≤100mm | ≤100mm | ≤100mm | |
| Height | ≤310mm | ≤310mm | ≤330mm | ≤330mm | ≤330mm | |
| Neck diameter | ≤38mm | ≤38mm | ≤38mm | ≤38mm | ≤38mm | |
| Mold | Cavity | 2 | 4 | 6 | 6 | 9 |
| Mold thickness | 240mm | 240mm | 240mm | 240mm | 240mm | |
| Mold volume | 260*240*370mm | 510*240*360mm | 640*240*360mm | 640*240*360mm | 840*240*360mm | |
| Main machine power | Electrical source power | 380V/220V 50/60Hz | 380V/220V 50/60Hz | 380V/220V 50/60Hz | 380V/220V 560/60Hz | 380V/220V 560/60Hz |
| 3Phase | 3Phase | 3Phase | 3Phase | 3Phase | ||
| Rated power | 25kw | 49kw | 73kw | 97kw | 127kw | |
| Really use power | 6.5kw | 13kw | 25kw | 32kw | 52kw | |
| Air system | HP air compressor | 1.6m³/min3.0MPa | 3.0m³/min3.0MPa | 6.0m³/min3.0MPa | 6.0m³/min3.0MPa | 8.0m³/min3.0MPa |
| LP air compressor | 1.0m³/min1.0MPa | 1.6m³/min1.0MPa | 2.0m³/min1.0MPa | 2.0m³/min1.0MPa | 2.0m³/min1.0MPa | |
| Air tank | 0.6m³3.0MPa | 0.6m³3.0MPa | 1.0m³3.0MPa | 1.0m³3.0MPa | 1.0m³3.0MPa | |
| Air dryer | 1.0m³/min3.0MPa | 2.0m³/min3.0MPa | 6.0m³/min3.0MPa | 6.0m³/min3.0MPa | 8.0m³/min3.0MPa | |
| Cooling water | Water Chiller | 3HP | 3HP | 5HP | 5HP | 8HP |
| Machine | Size(L*W*H) | 1900*1280*1930mm | 1900*1860*1930mm | 4100*1400*1800mm | 4100*2200*1800mm | 4700*2600*1800mm |
| Weight | 2000kg | 3600kg | 4200kg | 4800kg | 5700kg | |
| Preform unscrambler | Size(L*W*H) | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm |
| Weight | 500kg | 500kg | 500kg | 500kg | 500kg |
Semi automatic type machine:
Brand Name
Detail Photos:
Name:Auto-loader
Auto-loader improves working efficiency, accurate transportation, reliable and durable, raw materials are completely free of moisture, pollution, foreign matter, and loss during feeding process. Realize transportation process of feeding process, avoid danger of high-altitude feeding, reduce labor intensity and increase production efficiency.
Name:Servo transmission system
High positioning accuracy, fast speed and stability, good reliability. Gas circuit design will divide action and blowing into three parts to meet the needs of different pressure for blowing bottles and movement; Adopt high pressure and double crank arm link locking, strong clamping force.
High positioning accuracy, fast speed and stability, good reliability. Gas circuit design will divide action and blowing into three parts to meet the needs of different pressure for blowing bottles and movement; Adopt high pressure and double crank arm link locking, strong clamping force.
Name:Infrared lamp heating system:
Adopt infrared lamp heating, strong penetration, preform rotation heating, track revolution, heating evenly, fast and reliable; Heating lamp, reflector width and height can be adjusted to suit preform heating of different structure, with automatic temperature-removal device to ensure the constant temperature of oven.
Name:Servo clamping and stretching system for bottle molding
Blow the bottles according to the designed bottle molds,it adopts servo motor using for stretching to ensure the bottle blowing speed faster and more stable bottle quality.There are two cranks to control the clamping system which can shorten the mold-clamping time and improve productivity, and also solve the swelling mold and big joint line problem with the effect of pressurize plate.
Name: Auxiliary equipment
Complete Air compressor,filter,air tank to supply the machine with required gas.
Our Advantages
Blowing / Blow machine Features:
1. Stable performance with advanced PLC.
2. Automatic preform conveyer to save human cost.
3. Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4. High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5. High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6. Introduce the air cylinder to avoid contamination and noise.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mould.
9. Customized bottle mold design.
10. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. Easy installation and starting.
11. Contamination is avoided for the bottle body.
12. Ideal effect of the chilling with the chilling system.
13. Low rejection rate: Less than 0.2 percent.
14. Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
Reviews (0)
Shipping & Delivery
Products and services
Extensive product inventory
We have an extensive stock of used injection molding machines, covering a wide range of brands, models and specifications. Whether you need a small experimental injection molding machine or a large industrial production injection molding machine, we can provide you with the right choice.
Our products include but are not limited to monochrome injection molding machine, two-color injection molding machine, silicone injection molding machine, etc., to meet the diverse needs of different customers.
We have an extensive stock of used injection molding machines, covering a wide range of brands, models and specifications. Whether you need a small experimental injection molding machine or a large industrial production injection molding machine, we can provide you with the right choice.
Our products include but are not limited to monochrome injection molding machine, two-color injection molding machine, silicone injection molding machine, etc., to meet the diverse needs of different customers.
Professional testing and evaluation
Every used injection molding machine that enters our inventory is rigorously tested and evaluated. Our technical team uses professional testing equipment and tools to conduct a comprehensive inspection of the mechanical structure, electrical system, hydraulic system, etc., to ensure the performance and safety of the equipment.
We also provide a detailed evaluation report for each piece of equipment based on its age, maintenance and performance, so that customers can clearly understand the actual condition of the equipment.
Every used injection molding machine that enters our inventory is rigorously tested and evaluated. Our technical team uses professional testing equipment and tools to conduct a comprehensive inspection of the mechanical structure, electrical system, hydraulic system, etc., to ensure the performance and safety of the equipment.
We also provide a detailed evaluation report for each piece of equipment based on its age, maintenance and performance, so that customers can clearly understand the actual condition of the equipment.
Excellent after-sales service
We not only provide high-quality used injection molding machines, but also provide customers with a full range of after-sales service. Including equipment installation and commissioning, training guidance, maintenance and so on.
We have a professional after-sales service team, ready to provide customers with technical support and solutions. We promise to respond within [X] hours after receiving a customer's service request to ensure that the customer's production is not affected.
We not only provide high-quality used injection molding machines, but also provide customers with a full range of after-sales service. Including equipment installation and commissioning, training guidance, maintenance and so on.
We have a professional after-sales service team, ready to provide customers with technical support and solutions. We promise to respond within [X] hours after receiving a customer's service request to ensure that the customer's production is not affected.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Related products
20L 30L 50L 60liter Jerry Cans Plastic Blow Moulding Machine
customization:Available Type:Extrusion Blow Molding Machine Raw Material:HDPE Request A Quote 
HSll5L Plastic Bottle Making Machine Price 5l Hdpe Oil Bottle Extrusion Blow Molding Machine
This is our best series machine. This is servo hydraulic system. The clamping unit is elbow style and the clamping force is more uniform. lt is high speed and energy-saving.This machine is suitable for jerry can. lt can also be equipped with various die heads and then to make the small bottles. The main parts of this machine are designed and manufactured by ourselves. We do independent R&D and inspection. lf you have other special requirements, we can provide customized services for you. Request A Quote 
Sintex Type Plastic Water Tank Making Machine Blow Molding Machine
customization:Available Type:Extrusion Blow Molding Machine Raw Material:HDPE Request A Quote 
Reviews
There are no reviews yet.